What size socket do I need for a spark plug?
What size socket do I need for a spark plug?
Page Contents
Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.
What socket is used to take out spark plugs?
The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
What socket is the same as 5 8?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ |
How many different spark plug sockets are there?
The Two Different Types Of Spark Plug Sockets Out There… The two main types of spark plug sockets are ones that use a magnet to hold the spark plug in place and ones that use a rubber boot instead. They look very similar (the exact same, in fact) and serve the same purpose overall.
How do I know what size socket I need?
How to Determine the Right Size Socket for a Nut
- Turn on the digital caliper and set it to read in inches, not millimeters.
- Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides.
- Check the caliper display.
- Turn on the digital caliper and set it to read in millimeters, not inches.
What size socket wrench for spark plugs?
The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches.
What is the most common spark plug size?
The size of socket will vary with plug type and plug manufacturer. The most common sizes of spark plug nuts and the sockets used to remove/install them are 15/16″, 13/16″ and 5/8″.
What is the size of a spark plug?
A spark plug commonly comes in 5/8 inches and 13/16 inches, but may be larger than 1 inch or less than 8mm depending on the specification and requirement. It is better to remove the spark plug and visit the local shop.
What is a spark plug wrench?
The spark plug wrench is used to remove the spark plug from the engine. Click here to purchase part #89838S: http://www.repairclinic.com/PartDetai… Additional small engine repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website: